LA-2100400 Watt 2-Channel Amplifier
The Lightning Audio LA-2100 is a 400 Watt Stereo amplifier optimized for any full-range or component system speaker setup. This amplifier features hi-level or low-level inputs with selectable High-Pass or Low-Pass crossover and bass boost. Also featured are a pair of RCA outputs for daisy-chaning another amplifier, like one for driving subwoofers.
- High Level Inputs
- RCA Pass-Thru Outputs
- 12dB Bass Boost
- Adjustble 12dB/octave Crossover
- Built-In Fusing
- Standard Warranty - 1 Year
8ga Amp Kit W/ RCA for systems up to 500 Wattsmore info...
4ga Amp Kit w/ RCA for systems up to 1000 Wattsmore info...
8ga Amp Kit w/ Premium RCA for systems up to 500 Wattsmore info...
4ga Amp Kit w/ Premium RCA for systems up to 1000 Wattsmore info...
4ga Dual Amp Kit w/ Premium RCA for systems up to 1000Wmore info...
1/0ga Amp Kit w/ Premium RCA for systems up to 1500 Wattsmore info...
1/0ga Dual Amp Kit w/ Premium RCA for systems up to 1500Wmore info...
|Number of Channels||2|
|Rated Power||50 Watts x 2 @ 4-Ohms |
90 Watts x 2 @ 2-Ohms
180 Watts x 1 @ 4-Ohms
|Max Power||100 Watts x 2 @ 4-Ohms |
200 Watts x 2 @ 2-Ohms
400 Watts x 1 @ 4-Ohms
|Crossover Controls||12dB/octave HP/FULL/LP |
High-Pass (HP): 60Hz to 1.2kHz
Low-Pass (LP): 40Hz to 150Hz
|Tone Controls||Bass Boost: 0dB to +12dB @ 45Hz|
|Signal Input||High-Level: L/R Pins (2V to 12V) |
Low-Level: 2 RCA (200mV to 4V)
|Signal Output||Low-Level: (2) RCA Pass Thru|
|Power Input Connector||Block connector w/ set screw|
|Power Wire Gauge||8 AWG|
|Speaker Output Connector||Block connector w/ set screw|
|Speaker Wire Gauge||8 AWG|
|Heat Sink Type||Extruded aluminum|
|Visual Indicators||Power |
|Circuit Topology Class||Class A/B|
|THD at Rated Power||<1.0|
|Frequency Response||20Hz to 20kHz|
|Signal-to-Noise Ratio||>95 dB|
|Shipping Weight||8 Lbs. (3.6 Kg.)|
|Dimensions||L9.5" x W9.4" x H2.3" |
24.13cm x 23.876cm x 5.8cm
Knowledge BaseUpdated: (8/2/2010)
2010 Lightning Audio 2-Channel Amplifiers - owner's manual All Knowledge Base Topics